PETERBILT INTRODUCES NEW BENDIX SLACK ADJUSTERS AND ALSO SPRING BRAKES

PETERBILT INTRODUCES NEW BENDIX SLACK ADJUSTERS AND ALSO SPRING BRAKES

The Versajust slack insurance adjusters and also Eversure spring brakes are available for both guide and own axles on the Peterbilt Versions 579, 567, 520, 389, 367 and 365 as well as in Design 579 and also 389 glider packages.

The Bendix ® Eversure spring break offers the potential for increased payload, much better fuel economy and also reduced cost of procedure. The Eversure system is outfitted with one of the lightest chambers on the North American market, saving approximately 8 lbs. each tandem axle. The just recently boosted No Touch ™ Power Springtime style removes coil clash, while an enhanced power springtime shut elevation decreases tensions on the springtime as well as enables the brake to keep its pressure outcome over time.

The Bendix Versajust LS is a link-style automatic slack insurer that could extend lining life by up to 16% and also drum life by as much as 30%. The Versajust LS is made to dramatically reduce brake upkeep and minimize the danger of dragging brakes. The slack insurer is covered by a basic 6-year/1.0 M mile warranty.

MAI in Kenvil NJ and Peterbilt are pleased to announce the accessibility of the Bendix ® Versajust ® LS slack insurer and also the Bendix ® Eversure ® springtime break as manufacturing facility alternatives.

PETERBILT INTRODUCES NEW BENDIX SLACK ADJUSTERS As Well As SPRING BRAKES

PETERBILT INTRODUCES NEW BENDIX SLACK ADJUSTERS As Well As SPRING BRAKES

Major Automotive Installations in Kenvil NJ and Peterbilt they are pleased to announce the accessibility of the Bendix ® Versajust ® LS slack insurance adjuster and the Bendix ® Eversure ® springtime break as manufacturing facility alternatives.

The Bendix ® Eversure spring break provides the potential for enhanced payload, much better fuel economy and also reduced cost of operation. The Eversure system is outfitted with among the lightest chambers on the North American market, conserving up to 8 lbs. per tandem axle. The just recently improved No Touch ™ Power Spring layout eliminates coil clash, while a boosted power spring shut height decreases tensions on the spring as well as permits the brake to preserve its force result with time.

The Bendix Versajust LS is a link-style automated slack insurance adjuster that can prolong lining life by up to 16% and drum life by up to 30%. The Versajust LS is made to considerably decrease brake upkeep as well as reduce the threat of dragging brakes. The slack insurer is covered by a typical 6-year/1.0 M mile warranty.

The Versajust slack adjusters and also Eversure springtime brakes are readily available for both steer and also drive axles on the Peterbilt Models 579, 567, 520, 389, 367 and also 365 as well as in Design 579 and 389 glider sets.

PETERBILT INTRODUCES NEW BENDIX SLACK ADJUSTERS AND ALSO SPRING BRAKES

PETERBILT INTRODUCES NEW BENDIX SLACK ADJUSTERS AND ALSO SPRING BRAKES

The Bendix Versajust LS is a link-style automated slack adjuster that could extend lining life by as much as 16% and also drum life by as much as 30%. The Versajust LS is designed to substantially lower brake maintenance and also lessen the risk of dragging brakes. The slack adjuster is covered by a common 6-year/1.0 M mile guarantee.

Major Automotive Installations in Kenvil NJ and Peterbilt are pleased to introduce the schedule of the Bendix ® Versajust ® LS slack adjuster and the Bendix ® Eversure ® springtime break as manufacturing facility alternatives.

The Versajust slack insurance adjusters and also Eversure spring brakes are available for both steer and drive axles on the Peterbilt Models 579, 567, 520, 389, 367 and also 365 along with in Model 579 as well as 389 glider sets.

The Bendix ® Eversure spring break uses the potential for boosted payload, much better gas economy and reduced expense of the procedure. The Eversure unit is equipped with among the lightest chambers on the North American market, saving approximately 8 pounds. each tandem axle. The just recently enhanced No Touch ™ Power Springtime design eliminates coil clash, while a raised power spring closed height decreases anxieties on the springtime as well as allows the brake to keep its force outcome over time.

PETERBILT INTRODUCES ERGONOMIC COLUMN-MOUNTED SHIFTER FOR AUTOMATED TRANSMISSION

PETERBILT INTRODUCES ERGONOMIC COLUMN-MOUNTED SHIFTER FOR AUTOMATED TRANSMISSION

Major Automotive Installations in Kenvil NJ and Peterbilt is pleased to present a brand-new, ergonomic column-mounted shifter on the Models 579 and also 567. The column-mounted shifter will be standard on trucks outfitted with the automated PACCAR Transmission as well as those outfitted with Eaton Advantage as well as Ultra Change AMTs.

The brand-new shifter, located on the right-hand side of the guiding column, includes a multi-mode design and enables control of all transmission and engine brake features, including gear choice, engine brake mode and also guidebook changing. The column-mounted shifter places regulates at the chauffeur’s finger pointers, minimizing interruptions and allowing a raised focus on road problems and bordering web traffic.

” The column-mounted shifter takes the ergonomics of the Versions 579 and 567 to a brand-new degree,” stated Scott Newhouse, Peterbilt Principal Engineer. “The column-mounted shifter was made based upon in-depth research studies of driver behavior and comfort designs. This new design also permitted us to improve on the functionality of our dash by getting rid of engine brake control changes.”

The column-mounted shifter will be available on Versions 579 as well as 567 bought with automated transmissions starting in October 2017.

With the implementation of the column-mounted bar, a new-design pinch valve situated on the dashboard changed the typical lever for trailer brake activation, considerably boosting control during coupling and uncoupling maneuvers.

PETERBILT INTRODUCES ERGONOMIC COLUMN-MOUNTED SHIFTER Automotic TRANSMISSION<

PETERBILT INTRODUCES ERGONOMIC COLUMN-MOUNTED SHIFTER

” The column-mounted shifter takes the comfort designs of the Versions 579 and 567 to a brand-new level,” said Scott Newhouse, Peterbilt Principal Designer. “The column-mounted shifter was designed based upon thorough research studies of motorist actions and also comfort designs. This new design additionally enabled us to enhance the usability of our dashboard by eliminating engine brake control changes.”

The column-mounted shifter will be readily available on Versions 579 and also 567 purchased with automated transmissions beginning in October 2017.

The brand-new shifter, located on the right-hand side of the guiding column, includes a multi-mode style and enables control of all transmission and engine brake features, consisting of gear choice, engine brake mode and handbook shifting. The column-mounted shifter locations controls at the vehicle driver’s finger tips, reducing interruptions and also permitting an enhanced concentrate on roadway conditions and bordering website traffic.

Major Automotive Installations in Kenvil NJ and Peterbilt is pleased to present a brand-new, ergonomic column-mounted shifter on the Versions 579 as well as 567. The column-mounted shifter will certainly be conventional on trucks outfitted with the automated PACCAR Transmission as well as those furnished with Eaton Advantage as well as Ultra Change AMTs.

With the application of the column-mounted lever, a new-design pinch valve situated on the dashboard replaced the standard bar for trailer brake activation, significantly enhancing control throughout combining and uncoupling maneuvers.

Pierce Introduces High Flow Industrial Fire Apparatus at Fire Rescue International

Simpleness of procedure is an additional focus of Pierce’s product advancement group. One case in point is Pierce’s special valve controllers that offer real shutoff setting indication as well as an extraordinary degree of control with the touch of a switch. Additionally, the brand-new patent-pending circulation meters are a market initially, and also give exact circulation information across a wide series of circulation prices.

” In emergency scenarios, when a commercial pumper is called into action, optimum water as well as foam circulation are the leading priorities, and that’s specifically what we’ve accomplished with the brand-new Pierce High Circulation Industrial Apparatus– it’s numbers are off the graphes, and also established the new efficiency standard,” stated Matt McLeish, elderly vice president of Sales and also Advertising and marketing of the Fire & Emergency section. “Similarly essential, however, is the firefighting system’s endurance, dependability, as well as convenience of operation. The brand-new high-flow commercial apparatus delivers the dependability firemens anticipate from Pierce.”

The Pierce High Flow commercial Apparatus features the first application of a Darley 2ZSM water pump that delivers up to 10,000 gallons per min circulation rate from a pressurized water resource, as well as added reach to keep firemens additionally far from harm. “We worked very closely with the Darley group to engineer and integrate the system’s elements, which include a set of Darley ZSM pumps that are combined together on an usual transmission to deliver unusual efficiency,” stated John Schultz, supervisor of pumper and also custom-made framework items. “To say the least, it’s a quite impressive firefighting system.” Pierce has actually been granted 5 years of exclusivity on the Darley 2ZSM for commercial fire apparatus applications.

To complement the water pumping capacities of the brand-new Pierce High Flow Industrial Apparatus, Pierce expanded its distinguished line of Husky ™ foam systems. The brand-new Husky 450 foam system delivers up to 450 gallons of foam concentrate per min. “When flowing this much water, the foam system and also various other crucial parts needs to keep up, and that’s just what we have actually had the ability to achieve with this apparatus,” added Schultz.

APPLETON, Wis. (July 27, 2017)– Pierce Production Inc., an Oshkosh Corporation (NYSE: OSK) firm, today introduced the Pugs Vehicle Cabinets a new Pierce ® High Flow Industrial Device that is capable of flowing 5,500 gallons each minute when preparing, and also approximately 10,000 gallons each minute when drawing from a pressurized water source. This powerful as well as industry-leading automobile will certainly get on display screen at booth # 2801 at Fire Rescue International (FRI) in Charlotte, NC on July 27-29.

The Pierce High Circulation Industrial Apparatus is readily available on either the Pierce Velocity ® or Pierce Arrow XT ™ customized chassis, each showcasing a 600 hp engine.

Pierce Production today introduced the brand-new Pierce High Flow Industrial Apparatus that can streaming 5,500 gallons per minute when drafting, as well as much as 10,000 gallons per minute when drawing water from a favorable (hydrant) source. This powerful car will certainly be on display at booth # 2801 at Fire Rescue International (FRI) in Charlotte, NC on July 27-29.